SmartSaver

Is SmartSaver actually saving anything? These numbers are computed from the Hub's raw readings and state reports.

Dashboard · Configuration

Summary — week

15 Oct 00:00 to 21 Oct 19:43 UTC · 6.8216 day(s) of data · tariff ₱12.00/kWh

3.27
kWh saved
₱39.27
PHP saved
54h 33m
Actuator-hours saved
100.0%
Reduction vs. baseline

Payback progress

0.6% paid back₱5.74 saved of ₱909.28

Projected fully paid back by 19 Mar 00:54.

₱900.00
One-time cost
₱300.00
Monthly cost
₱909.28
Total cost to date
₱5.74
Savings to date

System health alert

Savings numbers are meaningless if the system is silently broken, so these are always visible rather than opt-in.

ComponentStatusDetail
Hub reachabilityalert22.70% over 6h 27m · 147 event(s) · longest gap 5h 14m
Sensor stalenessalert3 of 3 stale: climate (16h 18m), light (22h 25m), motion (16h 10m)
Wireless presenceok1 module(s) present.

Per-part breakdown

ActuatorBaselineActualSaved kWhCurrencyDaily savings
test
kitchen_relay · manual_habit · 60 W · confidence low
 54h 34m 0h 02m 54h 33m 3.27 ₱39.27
15 Oct – 21 Oct

Could have saved (advisory)

Advisory, not accounting. These are moments when an actuator was on while a sensor suggested it was not needed. They are estimates of potential savings and are deliberately kept out of the actual savings figures above.

0.000
Est. kWh
₱0.00
Est. PHP
WhenActuatorSensor Est. kWh wastedEst. currency
20 Oct 21:16 – 20 Oct 21:16 test
kitchen_relay
 light 0.000 ₱0.00
20 Oct 21:16 – 20 Oct 21:16 test
kitchen_relay
 light 0.000 ₱0.00
20 Oct 21:16 – 20 Oct 21:16 test
kitchen_relay
 light 0.000 ₱0.00
20 Oct 21:16 – 20 Oct 21:16 test
kitchen_relay
 light 0.000 ₱0.00
20 Oct 21:16 – 20 Oct 21:16 test
kitchen_relay
 light 0.000 ₱0.00

Sensor trends

Temperature (°C)

25.826.827.8°C15 Oct 00:00

Humidity (%)

62.063.064.0%15 Oct 00:00

Motion events per hour

49.00events

Light level (%)

0.050.0100.0%15 Oct 00:00