SmartSaver

Is SmartSaver actually saving anything? These numbers are computed from the Hub's raw readings and state reports.

Dashboard · Configuration

Summary — month

22 Sep 00:00 to 21 Oct 19:41 UTC · 29.8205 day(s) of data · tariff ₱12.00/kWh

14.31

kWh saved

₱171.75

PHP saved

238h 32m

Actuator-hours saved

100.0%

Reduction vs. baseline

Payback progress

0.6% paid back₱5.74 saved of ₱909.27

Projected fully paid back by 18 Mar 20:54.

₱900.00

One-time cost

₱300.00

Monthly cost

₱909.27

Total cost to date

₱5.74

Savings to date

System health alert

Savings numbers are meaningless if the system is silently broken, so these are always visible rather than opt-in.

Component	Status	Detail
Hub reachability	alert	22.70% over 6h 27m · 147 event(s) · longest gap 5h 14m
Sensor staleness	alert	3 of 3 stale: climate (16h 17m), light (22h 23m), motion (16h 08m)
Wireless presence	ok	1 module(s) present.

Per-part breakdown

Actuator	Baseline	Actual	Saved	kWh	Currency	Daily savings
test kitchen_relay · manual_habit · 60 W · confidence low	238h 34m	0h 02m	238h 32m	14.31	₱171.75	22 Sep – 21 Oct

Could have saved (advisory)

Advisory, not accounting. These are moments when an actuator was on while a sensor suggested it was not needed. They are estimates of potential savings and are deliberately kept out of the actual savings figures above.

0.000

Est. kWh

₱0.00

Est. PHP

When	Actuator	Sensor	Est. currency
20 Oct 21:16 – 20 Oct 21:16	test kitchen_relay	light	₱0.00
20 Oct 21:16 – 20 Oct 21:16	test kitchen_relay	light	₱0.00
20 Oct 21:16 – 20 Oct 21:16	test kitchen_relay	light	₱0.00
20 Oct 21:16 – 20 Oct 21:16	test kitchen_relay	light	₱0.00
20 Oct 21:16 – 20 Oct 21:16	test kitchen_relay	light	₱0.00

SmartSaver

Summary — month

Payback progress

System health alert

Per-part breakdown

Could have saved (advisory)

Sensor trends

Temperature (°C)

Humidity (%)

Motion events per hour

Light level (%)