SmartSaver

Is SmartSaver actually saving anything? These numbers are computed from the Hub's raw readings and state reports.

Dashboard · Configuration

Configuration

Per-part savings parameters and system settings, per section 10.4. Raw readings are never editable here.

kitchen_relay

always_on 24h/day · schedule by hours · manual_habit by estimate · off means no savings possible

Blank uses the system tariff of ₱12.00/kWh.

high / medium / low

System settings

Reset

Reset configuration clears every part/system setting but keeps the recorded readings. Reset all data also deletes readings, actuator events and topology snapshots. Both require the shared API key; neither can be undone.

Data quality

1 of 1 actuator(s) configured (100%). Actuators missing configuration cannot contribute to savings.

Every actuator has the configuration its savings need.